Max Feeding:
150×750mmCapacity:
2-6tphApplication:limestone, calcite, barite, dolomite, marble, quartz, gypsum, kaoline, iron ore, glass, fireproof materials.
Application range:Widely used in metallurgy, mining, chemical, cement, construction, refractory materials and ceramics industries.
Email: jacker@cfcmining.com
The production of jaw crushers has the characteristics of large breaking ratio, uniform product size, simple structure, reliable operation, easy maintenance, low operating costs and so on.
Jaw crusher Application:
1. Jaw crusher is mainly used for metallurgy, mining, chemical, cement, construction, refractory materials and ceramic industries as well as broken and finely various kinds of hard with rocks and ores.
2. This series crusher gravel crushing equipment best suited to the compressive strength is not higher than 300MPa (M Pa) of various hard and soft ore was broken material shall be not greater than the largest block of technical parameters the law.
This machine uses motor as its power. Through the motors wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.
Model | Feed opening size (mm) |
Max Feed size (mm) |
Adjusting range of discharge opening (mm) |
Capacity (t/h) |
Rotation speed of eccentric shaft (r/min) |
Motor power (kw) |
Total weight (t) |
Dimensions (L*W*H) (mm) |
PE-150×250 | 150×250 | 125 | 10-40 | 1-3 | 250 | 5.5 | 0.8 | 720×660×850 |
PE-200×300 | 200×300 | 180 | 15-50 | 2-6 | 260 | 7.5 | 1.2 | 910×750×990 |
PE-200×350 | 200×350 | 180 | 18-70 | 3-10 | 260 | 11 | 1.5 | 1000×870×990 |
PE-250×400 | 250×400 | 210 | 20-60 | 5-20 | 300 | 15 | 2.8 | 1300×1090×1270 |
PE-400×600 | 400×600 | 340 | 40-100 | 16-60 | 275 | 30 | 7 | 1730×1730×1630 |
PE-500×750 | 500×750 | 425 | 50-100 | 40-110 | 275 | 55 | 12 | 1980×2080×1870 |
PE-600×750 | 600×750 | 500 | 150-200 | 80-240 | 275 | 55 | 15.8 | 2070×2000×1920 |
PE-600×900II | 600×900 | 500 | 65-160 | 50-180 | 250 | 55 | 17 | 2190×2206×2300 |
PE-750×1060 | 750×1060 | 630 | 80-140 | 110-320 | 250 | 110 | 29 | 2660×2430×2800 |
PE-800×1060 | 800×1060 | 640 | 130-190 | 130-330 | 250 | 110 | 29.8 | 2710×2430×2800 |
PE-830×1060 | 830×1060 | 650 | 160-220 | 150-336 | 250 | 110 | 30.7 | 2740×2430×2800 |
PE-870×1060 | 870×1060 | 660 | 200-260 | 190-336 | 250 | 110 | 31.5 | 2810×2430×2800 |
PE-900×1060 | 900×1060 | 685 | 230-290 | 230-390 | 250 | 110 | 33 | 2870×2420×2940 |
PE-900×1200 | 900×1200 | 750 | 95-165 | 220-450 | 200 | 110 | 52 | 3380×2870×3330 |
PE-1000×1200 | 1000×1200 | 850 | 195-265 | 315-500 | 200 | 110 | 55 | 3480×2876×3330 |
PE-1200×1500 | 1200×1500 | 1020 | 150-350 | 400-800 | 180 | 160 | 100.9 | 4200×3300×3500 |
PE-1500×1800 | 1500×1800 | 1200 | 220-350 | 500-1000 | 180 | 280 | 122 | 5160×3660×4248 |
PE-1800×2100 | 1800×2100 | 1500 | 300-400 | 600-1200 | 160 | 400 | 150.6 | 6210×4013×4716 |
PEX-150×750 | 150×750 | 120 | 18-48 | 8-25 | 320 | 15 | 3.8 | 1200×1530×1060 |
PEX-250×750 | 250×750 | 210 | 25-60 | 13-35 | 330 | 30 | 5.5 | 1380×1750×1540 |
PEX-250×1000 | 250×1000 | 210 | 25-60 | 16-52 | 330 | 30 | 7 | 1560×1950×1390 |
PEX-250×1200 | 250×1200 | 210 | 25-60 | 20-61 | 330 | 37 | 9.7 | 2140×1660×1500 |
PEX-300×1300 | 300×1300 | 250 | 20-90 | 16-105 | 300 | 55 | 15.6 | 2720×1950×1600 |
The European version of the CJ jaw crusher, also known as the CJ European version of the jaw crusher.
The normal work of the jaw crusher is not only limited to reasonable operation and usual repair and test, minor repair, medium repair and overhaul, we should also carry out maintenance on a budget.
The Mobile Jaw Crusher Station adopts a flexible walking mode, integrating mechanical, hydraulic, electrical, and intelligent control technologies, eliminating